Overcome nano soldering challenges with JBC nano soldering stations
JBC soldering tools lifts nano soldering unseen heights

Nano soldering

Overcome nano soldering challenges 
with the high-precision JBC nano soldering stations

With the electronics industries persistent driving force to produce PCBs smaller and smarter for electrical devices, so rises the EMS & OEM factories demands for SMT production equipment that can handle rapid and accurate placement, high-precision nano hand soldering and easy rework on the tiny components and devices.

With more than 90-years experience and its innovative development the JBC soldering company, is renowned for their cutting edge hand soldering technology - with good reason!

Need more control when micro-soldering by hand?
Get maximum power & control when hand soldering under a microscope, with a compact nano soldering station that is designed, tested and used by soldering specialists specifically for any micro-soldering or nano rework job.

Overcome nano soldering challenges  with the high-precision JBC nano soldering stations

JBC CDN  |  Nano soldering station > New product launced <

Little yet more powerful - a soldering station that can help you overcome nano soldering challenges


This extra powerful soldering station can assist with production and rework soldering tasks. The CDN stations has 1 tool with impressive 25W*, that is developed to handle even the most challenging nano soldering assignments.

JBC CDN soldering station highlights:
➡️ Super fast thermal response time
        2.61 seconds from turn-on to soldering (using cartridge C115214)
➡️ Significantly faster soldering performance without impacting the tip-life
➡️ 1 x Nano handle
➡️  highly efficient to solder grounded components due to high 25W power
➡️  price accessible as it is the smallest in the nano soldering range
*in comparison the NASE & NANE soldering station has 14W per soldering handle.

Pick the nano soldering station that fit your production needs

3 of our most sold JBC nano soldering stations - what is the difference?

The displayed 3 soldering stations below differs mainly on the type and amount of soldering handles it is equipped with.

JBC NASE nano soldering station

Nano soldering with JBC NASE

The JBC NASE station is equipped with: 

  • 1 x nano tweezer soldering handle
  • 1 x nano soldering iron
JBC NANE nano soldering station

Nano soldering with JBC NANE

JBC NANE station is equipped with: 

  • 2 x nano soldering irons
JBC CDN nano soldering station

Nano soldering with JCB CDN > new <

JBC CDN station is equipped with: 

  • 1 x nano soldering iron

Nano soldering

Overcome nano soldering challenges even with the smallest SMDs

Performing soldering and rework on e.g. 0201 / 01005 SMD components under microscope demands high precision soldering equipment.
𝗝𝗕𝗖 𝟮-𝗧𝗼𝗼𝗹 𝗡𝗮𝗻𝗼 𝗥𝗲𝘄𝗼𝗿𝗸 𝗦𝘁𝗮𝘁𝗶𝗼𝗻 offers:
➡️ maximum control even under a magnifying glass
➡️ lightweight & ergonomic tools
➡️ nano tweezers
➡️ nano handle
➡️ sleep & hibernation modes
➡️ intelligent heat control
➡️ a wide cartridge / solder tip selection
We offer the ‘𝗝𝗕𝗖 𝗡𝗔𝗦𝗘 𝟮-𝗧𝗼𝗼𝗹 𝗡𝗮𝗻𝗼 𝗥𝗲𝘄𝗼𝗿𝗸 𝗦𝘁𝗮𝘁𝗶𝗼𝗻’ shown in the video alongside the complete JBC product line.

Nano soldering expert guidance

Nano soldering equipment guidance & prices

Contact Brian Sloth
   +45 22 80 75 44

JBC NANE & JBC NASE  |  Nano soldering stations

Nano soldering station preforms excellent connector rework

Come along for at connector rework job where the JBC nano soldering station is used.

Connector rework video that show:
➡️ point to point soldering 
➡️ drag soldering after short circuit remove

Without your commitment and energy, we would not be where we are now
Summer news & Summer vacation info